Hoover S3755050 Bedienungsanleitung PDF herunterladen (Seite 3)

Unpack cleaner from carton and iden-

tify the parts shown. Remove and

dispose of cardboard packing.

A. Canister cleaner

B. WindTunnel™ powered nozzle

C. Extension wand and hose

Operate cleaner only at voltage speci-

fied on data plate on bottom of

cleaner.

1-1

1. Assembling cleaner

This cleaner was inspected and packaged carefully before being shipped

from the factory. If you should happen to need assistance during assembly

or operation,

Visit us online at

www.hoover.com to find the service outlet nearest

you (click on the “Service” button) OR

Call 1-800-944-9200 for an automated referral of authorized service

outlet locations (U.S. only) OR

Call 1-330-499-9499 to speak with a representative in the Hoover

Consumer Response Center.

Carton contents

Connect hose, wand and nozzle

1-2

Connect hose

Push the hose connector end (A) into the

opening (B) on the front of the cleaner.

To disconnect hose from the cleaner,

press on the button (C) on the hose con-

nector and pull forward.

Note: The flexible hose contains elec-

trical wires for connection to the

power nozzle and should not be used

if damaged. The wires should not be

seen through the outer skin.

Continued

➟

1-3

Attach wand and power

nozzle

Push the end of the wand with the

pronged plug (D) firmly into the end of

the hose until the latch (E) clicks.

To remove the wand from the hose,

press on the thumb latch (E) located on

the end of the wand.

Push the opposite end of the wand into

the power nozzle until the button projec-

tion (F) on the end of the wand clicks.

To release, step on quick disconnect

foot pedal (G) and remove nozzle.

1-4

D F

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

Hoover S3755050 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Staubsauger Hoover S3755050